ULTRA Micro Concrete will be supplied as a ready to use blend of dry powders which require only the site addition of clean water to produce a free - flowing , shrinkage compensated, micro concrete suitable for large volume repairs & many smaller locations where difficulties of access make hand or trowel applied mortars impractical. It is developed with high strength formulation or structural concrete & so formulated can be used to reinstate large sections of concrete. It is based on Portland cement graded fillers & additives which control shrinkage / reduce water demand / facilitate quick & easy working with controlled quality.
|Extensive repairs to beams, columns & other structural elements
Ideal material for vertical or horizontal structural repairs
Dual shrinkage compensated - Volume stable in wet
Hardened state reducing cracking tendency
No bonding agent required - Simple installation
Impermeable to aggressive elements - Long life repairs
|It can be used to repair large sections of damaged concrete,
Repairing new / old structural beams & columns.
Repairing defects in Railway sleepers, RCC Hume pipes etc.
Core packing area
Structure strengthening .
ULTRA SG is a free flow, high strength, nonshrink, cementitious precision grout. Ultra SG is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing & non-shrink grout for gap thicknesses up to 100mm. ULTRASG is a blend of Portland cement, graded fillers & chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing & produce a consistent grout.
|Compensates for shrinkage
No metallic iron content to cause staining.
Develops high early strength without the use of chlorides.
Durability of the hardened grout.
Free flow ensures high level of contact with load bearing area
|ULTRA SG is used for precision grouting
For anchoring a wide range of fixings
Typical applications would be the grouting of base
Plates of turbines, compressors, boiler feed pumps etc.
|10 & 25Kg
|5.5 Ltr. water / 20 kg. Bag